LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (2.0L - Engine Assembly - Engine Code(S): CBFA & CCTA (Hatchback)) >> 10 Engine Assembly >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Component Fastener Size Nm
Bolts and Nuts
- M6 9
M7 15
M8 23
M10 40
M12 60
Engine Mount to Body Bolt (1) - 40 + 90°
Engine Mount Bracket to Engine Bolt (1) - 40 + 180°
Engine Mount to Engine Mount Bracket Bolt (1) - 60 + 90°
Pendulum Support to Subframe Bolt 1, 2 - 100 + 90°
Pendulum Support to Transmission Bolt (1) - 50 + 90°
Support to Body Bolt (1) - 20 + 90°
Support to Engine Mount Bolt (1) - 20 + 90°
Transmission Mount to Body Bolt (1) - 40 + 90°
Transmission Mount to Transmission Mount Bracket Bolt 1 - 60 + 90°
(1) Always replace
(2) First, install the pendulum support bolt to the transmission and then the bolts to the subframe.
scientia non olet · About LEMON Manuals