LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (1.8L & 2.0L - Engine Assembly - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Hatchback)) >> 10 Engine Assembly >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Components Fastener Size Nm
Engine nuts and bolts M6 10
M7 15
M8 20
M10 40
M12 65
Engine mount to body bolt1 - 40 + 90°
Bracket to engine mount and body bolt1 - 20 + 90°
Engine mount to engine support bolt1 - 60 + 90°
Transmission mount to transmission support bolt1 - 60 + 90°
Transmission mount to body bolt1 - 40 + 90°
  • 1 : Replace after removing.
scientia non olet · About LEMON Manuals