LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (1.8L & 2.0L - Engine Assembly - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Hatchback)) >> 10 Engine Assembly >> Removal And Installation >> Pendulum Support >> Removal

Pendulum Support: Removal

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation, refer to Overview - Herbie Beetle Decorative Film .

-- Remove the bolt -1-.

Fig 1: Identifying Pendulum Support
GWWM10-10034Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -2- and -3-.

-- Remove pendulum support -4-.