Steering Gear

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

To perform a problem-free and successful steering gear repair, extreme caution and cleanliness, as well as properly functioning tools are an important requirement. Understandably, general safety guidelines apply when performing repairs.

A series of applicable general notes for individual repair procedures - otherwise listed several times at many points in the repair information - has been collected here. They apply for this repair information.

For a complete description regarding removing and the function of the electro-mechanical power steering system. Refer to SSP #317 - The Electro-Mechanical Power Steering Design and Function.

A description for the removal and the function of the hydraulic power steering is found in the SSP #487 - 2012 Beetle.

Thoroughly clean connecting points and their surrounding areas before loosening.
When installing steering gear, make sure centering sleeves are correctly seated between console and steering gear.
Place removed parts on a clean surface and cover to prevent contamination. Use foils and paper. Only use lint-free cloths!
Install clean parts only: remove the replacement part from its packaging just before installing it.
Use exclusively lubricants and sealants marked with part numbers.
Carefully cover or seal open components, if repairs are not carried out immediately.