Vehicle Electrical System Control Module -J519-: Removal

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical consumers and remove the ignition key.

-- Remove the footwell cover on the driver side, if equipped.

The Vehicle Electrical System Control Module -J519- is locked to the front of the relay panel on the bottom.

-- Press the catches -arrows- and swivel the Vehicle Electrical System Control Module -J519- downward.

Fig 1: Identifying Vehicle Electrical System Control Module

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pull the Vehicle Electrical System Control Module -J519- downward and opposite the drive direction and remove it from the bracket.

-- Disconnect the connectors.