RELAY PANEL ON Vehicle Electrical System Control Module -J519-: Removal
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical consumers and remove the ignition key.
-- Open the fuse panel door on the driver side.
-- Remove the relay from the relay panel.
NOTE:
The number of relays is dependent on vehicle equipment.
-- Clip the tabs -arrows- toward the outside and push the connector -2- through the relay panel -1-.