Removal And Installation: E-Box: Removal

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the Battery -A-, refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Press the catches in direction of the -arrow- and remove the cover from the E-box -2-.

Fig 1: Identifying E-Box Cover Catches

GWWM97-10007

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the wires -2-.

Fig 2: Remove/Install Relay And Fuse Panel Components

GWWM97-10008

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the wires from the connecting pins.

-- Press the tabs -arrows- on the relay and fuse panel -1-.

Fig 3: Remove/Install Relay And Fuse Panel Components

GWWM97-10008

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the relay and fuse panel -1- from the E-box.

-- Remove the Engine Control Module -J623- -2- and bracket -1- off the E-box. To do this, first remove the shear bolts -arrows-.

Fig 4: Identifying Engine Control Module And Bracket

GWWM97-10095

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Engine Control Module -J623-, removal and installation, refer to Engine Control Module -J623- .

-- Remove the bolt -2- on the E-Box -3-.

Fig 5: Identifying E-Box With Nuts And Bolt

GWWM97-10096

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the nuts -1-.

-- Remove the E-box -3- from the vehicle.