LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 188 (Wiring (Hatchback)) >> 97 Wiring >> Description And Operation >> Data Bus On Board Diagnostic Interface -J533- FUNCTION >> DTC Recognition And Display

DTC Recognition And Display

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

The Data Bus On Board Diagnostic Interface -J533- is equipped with OBD.

Use the Vehicle Diagnostic Tester in "Guided Fault Finding".

The Data Bus On Board Diagnostic Interface -J533- is installed in the right footwell on the driver side next to the steering column.

Before removing the Data Bus On Board Diagnostic Interface -J533-, refer to Data Bus On Board Diagnostic Interface -J533-, ADAPTING FUNCTIONS . The procedure must be performed must be performed to read out (copy) the codes stored within it.