Clutch System, Bleeding: Notes

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Brake Charger/Bleeder Unit VAS 5234
Bleeder Hose (670 mm) VAG 1238/B3

NOTE:

Bleed the system after working on the hydraulic clutch mechanism.

Make sure no brake fluid gets on the longitudinal member or transmission when performing the work.

It is not necessary to pre-fill the system.

Before bleeding, fill the brake fluid reservoir to the "MAX" mark with brake fluid.

The clutch pedal is in the neutral position and is not pressed.

For the correct brake fluid specification.