LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Front Suspension (Hatchback)) >> 40 Front Suspension >> Removal And Installation >> SUBFRAME >> Stabilizer Bar >> Installing

Stabilizer Bar: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

The steering gear threaded sleeves must be seated in the subframe holes on the left side.

-- Install the lower noise insulation. Refer to Description and Operation .

-- Install front wheels and tighten. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .

scientia non olet · About LEMON Manuals