SUBFRAME Brace: Installing
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Install the subframe brace -1-.
-- Install the bolts -2- hand-tight only.
-- Tighten the bolt -3- to the tightening specification only.
-- Lower the vehicle onto its wheels.
NOTE:
Tighten the bolts on the subframe brace only when the vehicle is resting on its wheels.
-- Tighten the bolts -2- to the tightening specification and with an additional turn.
-- Tighten the bolt -3- with an additional turn.
-- Install the right and left underbody panels. Refer to Description and Operation .