Tightening Specifications
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to LOWER CONTROL ARM AND BALL JOINT OVERVIEW .
- Refer to SUBFRAME OVERVIEW .
- Refer to REMOVAL AND INSTALLATION .
- Refer to STEERING GEAR OVERVIEW .
- Pendulum support bolts. Refer to OVERVIEW - SUBFRAME MOUNT .
- Noise insulation bolts. Refer to Description and Operation .
- Exhaust system bracket to subframe. Refer to FASTENER TIGHTENING SPECIFICATIONS .
| Component | Tightening Specification |
|---|---|
| Union nut, pressure/return line to the steering gear | 32 Nm |