LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Front Suspension (Hatchback)) >> 40 Front Suspension >> Removal And Installation >> Lower Control Arm And Ball Joint >> Ball Joint >> Installing

Ball Joint: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Make sure the ball joint boot is not damaged or twisted.

-- Install the wheel and tighten the wheel bolts. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .

-- Tighten drive axle bolt onto the wheel hub.. Refer to THREADED CONNECTION, LOOSENING AND TIGHTENING .

scientia non olet · About LEMON Manuals