Removing the Outer CV Joint

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Secure the drive axle with protective covers in a vise clamp.

-- Fold back boot.

-- Align the Puller T10382 so that the flat side of the Plate T10382/1 faces the Spindles T10382/2.

-- Attach the Puller T10382 to the Slide Hammer Set VW771.

-- Remove the CV joint from the drive axle using the Puller T10382 and Slide Hammer Set VW771.

Fig 1: Identifying Outer CV Joint

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Plate T10382/1
Spindles T10382/2