LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Front Suspension (Hatchback)) >> 40 Front Suspension >> Diagnosis And Testing >> Outer CV Joint, Checking >> Installing

Outer CV Joint, Checking: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Press in half of the total grease amount (40 grams) into joint body.

-- Insert cage with hub into joint body.

-- Press in opposing balls in sequence, during this, previous position of ball hub to ball cage and to joint body must be established again.

-- Install new circlip into the hub.

-- Distribute remaining grease in the joint boot.

scientia non olet · About LEMON Manuals