LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 184 (2.5L - Crankshaft, Cylinder Block - Engine Code(S): CBTA & CBUA (Hatchback)) >> 13 Crankshaft, Cylinder Block >> Diagnosis And Testing >> Crankshaft, Measuring Axial Clearance >> Test Sequence

Test Sequence

WARNING: This page is about a different car, the 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Attaching Dial Indicator Together With VW 387 Dial Gauge Holder To Cylinder Block And Set Indicator Against Crankshaft Counterweight
GWWA13-0468Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Attach Dial Indicator VAS 6079 together with Dial Gauge Holder VW 387 to cylinder block and set indicator against crankshaft counterweight.

-- Press the crankshaft by hand against the Gauge and set the Gauge to "0".

-- Press crankshaft off gauge and read value.

Axial clearance:

scientia non olet · About LEMON Manuals