Fender Brace: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The following describes removing and installing the left fender brace. Removing and installing right fender brace is identical.

-- Remove the front bumper cover, refer to FRONT BUMPER COVER .

-- Remove the guide from the front bumper cover, refer to GUIDES AND BRACKETS OVERVIEW .

-- Remove the headlamp carrier plate bolt on the fender brace -2-.

Fig 1: Identifying Fender Brace And Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the nut that attaches the front fender to the fender brace -2-, refer to FENDER OVERVIEW .

-- Remove the bolts -1- and the fender brace -2-.