Bracket, Removing and Installing: Removing
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the nuts -1- for the bracket -2-.
-- Tilt the bracket -2- inward from the threaded pin in direction of -arrow a-.
-- Finally, remove the bracket -2- forward and downward in direction of -arrow b- and -arrow c-.