LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 180 (Bumpers (Hatchback)) >> 63 Bumpers >> Description And Operation >> Front Bumper >> Attachments Overview

Attachments Overview

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Depending on model version, slight deviations for attachments must be considered.
Fig 1: Identifying Attachments Overview
GWWM63-10026Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Front Bumper Cover
    • PP/EPDM material
    • There are different versions. Use allocation.
    • Removing and Installing, refer to FRONT BUMPER COVER .
  2. Cover
    • Left and right
    • Pull forward out of the catch.
    • There are different versions. Use allocation.
  3. Vent Grille
    • Remove only when bumper cover -1- has been removed
    • There are different versions. Use allocation.
  4. Trim Strip
    • For the left and right cover -2- depending on the model
    • Use allocation.
  5. Trim Strip
    • For the air grille -3-, depending on the model
    • Use allocation.
  6. Spoiler
    • Remove only when bumper cover -1- has been removed
    • There are different versions. Use allocation.
  7. Clip
    • For attaching the license plate holder -8-
  8. License Plate Holder
    • Not installed on all models for all markets.
    • There are different versions. Use allocation.
  9. Cover
    • For the towing eye.