Exhaust Pipes/Mufflers

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

After exhaust system repairs, make sure the exhaust system is not under stress and is far enough from the body. If necessary, loosen the clamping sleeve(s) and align the muffler and exhaust pipe so that there is adequate distance to the body and that the weight is evenly distributed among the suspended mounts.
The coupling element in the front exhaust pipe must not be bent more than 10°, otherwise it may be damaged.
Replace gaskets and self-locking nuts.
The exhaust manifold and the turbocharger are one component, removing and installing. Refer to TURBOCHARGER .
It is not necessary to separate the exhaust system in order to remove it because it runs under the rear subframe.

Special Tools And Workshop Equipment Required

Ring Spanner 7-Piece Set 3337
Torque Wrench (5-50 Nm) VAG 1331
Body Repair Saw VAG 1523 A
Chain Pipe Cutter VAS 6254