Engine Code CBFA
WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- Gasket
- Always replace.
- Secondary Air Injection Solenoid Valve -N112-
- Removing and installing, refer to SECONDARY AIR INJECTION SOLENOID VALVE -N112- .
- Bolt
- 9 Nm
- Secondary Air Injection Sensor 1 -G609-
- O-ring
- No replacement part available.
- If damaged, replace the secondary air injection sensor 1.
- to the Upper Air Filter Housing
- Connecting Pipe
- Make sure it is secure.
- Routing Aid for the Air Filter Housing Drain Tube
- Nut
- 9 Nm
- Bracket
- For the Secondary Air Injection (AIR) pump motor.
- Nut
- 25 Nm
- Secondary Air Injection (AIR) Pump Motor -V101-
- Removing and installing, refer to SECONDARY AIR INJECTION PUMP MOTOR -V101- .