LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (1.8L & 2.0L - Exhaust System & Emission Controls - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Hatchback)) >> 26 Exhaust System, Emission Controls >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Components Fastener Size Nm
Rear Muffler Bolt1 - 25
Exhaust System Bracket To Body Bolt1 - 25
Center Muffler Bracket To Body Bolt1 - 25
Front Tensioning Strap To Body Bolt1 - 25
Clamping Sleeve Bolt (With Two Individual Clamps) - 25
Clamping Sleeve Bolt (With Continuous Clamp) - 35
Catalytic Converter Bracket Bolt - 23
Air Filter Housing Bracket On Body Nut - 8
Secondary Air Injection Solenoid Valve Bolt - 9
Secondary Air Injection Pump Motor Bracket Nut - 8
  • 1 : Replace after removing.