Secondary Air Injection Solenoid Valve -N112-: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the air filter housing, refer to AIR FILTER HOUSING .

-- Remove the battery tray, refer to BATTERY TRAY .

-- Disconnect the connector -3-.

Fig 1: Identifying Connecting Pipe And Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Squeeze the locking ring on both side and remove the connecting pipe -1-.

-- Remove the bolts -arrows-.

-- Push the coolant pipe -2- gently aside.

Fig 2: Locating Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- and the Secondary Air Injection Solenoid Valve -N112-.