LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (1.8L & 2.0L - Exhaust System & Emission Controls - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Hatchback)) >> 26 Exhaust System, Emission Controls >> Diagnosis And Testing >> Exhaust System, Checking For Leaks >> Procedure

Exhaust System, Checking For Leaks: Procedure

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Start the engine and let it run at idle.

-- Seal the tail pipes with cloths or plugs during the leakage test.

-- Check for leaks where the exhaust manifold attaches to the cylinder head and where the turbocharger attaches to the front exhaust pipe.

-- Repair detected leaks.