Overview - Emissions Control
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- Bracket
- For catalytic converter
- To subframe
- Catalytic Converter
- With front exhaust pipe
- Protect catalytic converter from shocks and impact stress
- Removing and installing, refer to CATALYTIC CONVERTER WITH FRONT EXHAUST PIPE .
- V-Clamp
- Replace after removing
- Tightening specification, refer to OVERVIEW - TURBOCHARGER .
- Seal
- Replace after removing
- Turbocharger
- Removing and installing, refer to TURBOCHARGER .
- Front Clamping Sleeve
- Before tightening, align exhaust system free of tension, refer to CLAMPING SLEEVE LOCATIONS .
- Tighten threaded connections evenly.
- Bolt
- 23 Nm