Removal And Installation: Hood: Removing
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the spray nozzles -5-, refer to[For transmission(s) 0A4, 02E, 09G, 02Q] [For engine(s) CVCA, CPRA, CBTA, CPKA, CPLA, CJAA, CBUA, CPPA, CCTA, CBFA] Removal and Installation .
-- Remove the line for the spray nozzle and the grommet from the hood -1-.
-- Loosen the left and right bolts -3- from the hinge -2-. (do not remove the bolts).
A second technician is required for the rest of the removal procedure.
-- Remove the support rod -4- from the hood.
-- First remove the bolts -3- and remove the hood -1- from the hinges -2-.