Hood Release Lever: Removing
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Pull the hood release lever -1- and release the hood.
-- Insert a small screwdriver into the gap between the hood release lever -1- and the clip -2-.
-- Pry the clip -2- out of the hood release lever -1- -arrow a- and then remove the hood release lever from the bracket -3- -arrow b-.
It is necessary to remove the A-pillar lower trim -4- to continue working on the bracket -3-, refer to Removal and Installation .