LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Exterior Body Panels (Hood, Lids) (Hatchback)) >> (55 Hood, Lids) >> Removal And Installation >> Hood Latch >> Removing

Hood Latch: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Hood Latch Components
GWWM55-10078Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Open the hood.

-- Remove the release cable from the coupling, refer to HOOD RELEASE CABLE COUPLING, DISASSEMBLING AND ASSEMBLING .

-- Remove the bolts -1- for the hood latch -2- from the engine compartment side.

-- Carefully pull the hood latch -2- upward and out of the lock carrier until the Engine Hood Contact Switch -F266- -1- is accessible.

Fig 2: Removing Hood Latch
GWWM55-10080Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the hooks -arrow a- on the Engine Hood Contact Switch -F266-.

-- Push the Engine Hood Contact Switch -F266- in the direction of the arrow b- and remove it from the hood latch -2-.

-- Remove the hood latch further upward from the lock carrier.

-- Press the retaining strap on the mount -arrows- and remove the retainer -2-.

Fig 3: Removing Hood Release Cable From Hood Latch
GWWM55-10079Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the release cable -3- from the hood latch -1-.