LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Exterior Body Panels (Hood, Lids) (Hatchback)) >> (55 Hood, Lids) >> Description And Operation >> Rear Lid, Adjusting, Sedan >> Side Adjusting Buffer and Stop, Removing and Installing >> Removing

Side Adjusting Buffer and Stop, Removing and Installing: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Side Adjusting Buffer And Stop
GWWM55-10099Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip the cap -2- from the adjusting buffer -4-.

-- Remove the bolt -3- and remove the adjusting buffer -4- from the rear lid -1-.

-- Remove the bolt -6- and remove the stop -5- from the side panel.

scientia non olet · About LEMON Manuals