LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Seat Frames (Hatchback)) >> 72 Seat Frames >> Removal And Installation >> Front Seats >> Seat Height Adjustment >> Removing

Seat Height Adjustment: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Position the seat in the highest seat position.

-- Remove backrest adjusting wheel, refer to Removing 

-- Remove the seat height adjustment handle. Refer to Removing 

-- Remove the trim on the door sill side. Refer to Removing .

-- Remove bolts -2- (quantity: 2).

Fig 1: Identifying Bolts
GWWA72-10672Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the lever for the seat height adjustment -1-.

-- Remove the lock washer -1-.

Fig 2: Identifying Lock Washer
GWWA72-10670Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

The bolts -1- and the bolt -3- are different lengths. The bolt -3- is shorter.

Fig 3: Identifying Seat Height Adjustment With Bolts
GWWM72-10035Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -1- (quantity: 2) and -3-.

-- Remove the seat height adjustment -2-.

scientia non olet · About LEMON Manuals