Entry Assist Cable B: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Install the entry assistance cable B eyelets -1- first on the backrest hinge bolts -arrow-.

Fig 1: Identifying Entry Assistance Cable B Eyelets

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Thread in and attach the entry assistance cable B -1- through the slits for the backrest hinges, to the point where the tabs -arrows- engage.

Fig 2: Identifying Entry Assistance Cable B

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the entry assistance cable B eyelets -3- on the seat rail bolts -arrow-.

Fig 3: Identifying Entry Assistance Release Cables

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Attach the entry assistance cable B -3- to the seat forward/back adjustment -2-.

Install in reverse order of removal.

When installing, make sure that the release cables -1- and -2- are routed as shown. Never cross the release cables!

Fig 4: Identifying Release Cables

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.