Front Seat Entry Assistance Release Cable A, Adjusting: Notes
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
The following conditions must be met to adjust the release cable:
- The upholstery must be removed from the seat and backrest and they must be bolted to each other.
- The entry assistance release cable B must be engaged at the backrest and on the lower seat frame.
- In order to adjust the release cable correctly, move the backrest all the way to the front position using the hand wheel.
- The adjustment is only performed on the inside of the vehicle on the tunnel side of the seat.