LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 170 (2.0L - Ignition/Glow Plug System - Engine Code(S): CJAA & CVCA (Hatchback)) >> 28 Glow Plug System >> Removal And Installation >> Glow Plug Connectors, Removing And Installing >> Installing

Glow Plug Connectors, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Guide the center terminal on the connector -arrow A- into the glow plug socket -arrow B- by hand.

Fig 1: Guiding Center Terminal On Connector
GWWM97-0529Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the glow plug connector -1- on by hand until it engages.

Fig 2: Identifying Pressing On Glow Plug Connector
GWWM97-0530Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals