Knock Sensor 1 -G61-: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the connector -2- from Knock Sensor 1 -G61-.

Fig 1: Locating Connectors

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the coolant pump with thermostat, refer to COOLANT THERMOSTAT HOUSING .

NOTE: The Knock Sensor 1 -G61- is located below the intake manifold behind the coolant pump.

-- Remove the Knock Sensor 1 -G61- bolt -arrow- and remove the Knock Sensor 1 -G61-.

Fig 2: Locating Knock Sensor Bolt

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.