LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (1.8L & 2.0L - Ignition/Glow Plug System Engine Code(S): CPKA, CPLA, CPPA & CPRA (Hatchback)) >> 28 Ignition/Glow Plug System >> Removal And Installation >> Knock Sensor 1 -G61- >> Installing

Knock Sensor 1 -G61-: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Install in reverse order of removal. Note the following:

-- Note the installed position of the Knock Sensor 1 -G61- -arrow-.

Fig 1: Locating Knock Sensor Bolt
GWWA28-10028Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the coolant pump with thermostat, refer to COOLANT THERMOSTAT HOUSING .

scientia non olet · About LEMON Manuals