Camshaft Position Sensor -G40-: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover, refer to ENGINE COVER .

-- Remove the intake manifold, refer to INTAKE MANIFOLD .

-- Disconnect the connector -2-.

Fig 1: Identifying Camshaft Position Sensor, Connector And Bolt

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -arrow- and camshaft position sensor -1-.