Overview - Ignition System
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 10 Nm
- Ignition Coil with Power Output Stage
- Ignition Coil 1 with Power Output Stage -N70-
- Ignition Coil 2 with Power Output Stage -N127-
- Ignition Coil 3 with Power Output Stage -N291-
- Ignition Coil 4 with Power Output Stage -N292-
- Ignition coils with power output stage and spark plug connectors can be obtained individually for repairs
- Removing and installing, refer to IGNITION COILS WITH POWER OUTPUT STAGES -N70-, -N127-, -N291- AND -N292- .
- Spark Plug
- Removing and installing, refer to => 14.2Spark Plugs, Replacing.
- Bolt
- 20 Nm
- Replace after removing
- The tightening specification affect how the knock sensor functions
- Knock Sensor 1 -G61-
- Contacts gold plated
- Removing and installing, refer to Knock Sensor 1 -G61- .
- Camshaft Position Sensor -G40-
- Camshaft Position Sensor -G40-, Removing and Installing, refer to Camshaft Position Sensor -G40- .
- Replace O-ring
- Bolt
- 9 Nm
- Engine Speed Sensor -G28-
- Check the O-ring for damage
- Removing and installing, refer to Engine Speed Sensor -G28- .
- Bolt
- 10 Nm