LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 165 (2.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CJAA & CVCA (Hatchback)) >> 15 Cylinder Head And VALVETRAIN >> Removal And Installation >> Valve Shaft Seal >> Valve Stem Seal, Replacing, Cylinder Head Installed >> Assembling

Valve Stem Seal, Replacing, Cylinder Head Installed: Assembling

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Assembly is performed in reverse order. Note the following:

-- Make sure all the roller rocker levers lie on the ends of the valve stems correctly and are clipped onto the respective hydraulic adjusting elements.

-- Install the camshafts. Refer to Installing .

-- Install the glow plugs. Refer to GLOW PLUG .

scientia non olet · About LEMON Manuals