Cylinder Head: Notes
WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Centering Mandrel 3070
- Diesel Injection Pump Locking Pin 3359
- Crankshaft Stop T10050
- Camshaft Gear Counter-Holder T10051
- Puller T10052
- XZN 10 Socket T10385
- Torque Wrench 5-50 Nm V.A.G 1331
- Torque Wrench 40-200 Nm V.A.G 1332
- Drip Tray for VAS 6100 VAS 6208
- Hose Clip Pliers VAS 6340
WARNING:
When doing any repair work, especially in the engine compartment, pay attention to the following due to clearance issues:
- Route all wires and lines so that the original path is followed.
- Ensure sufficient clearance to all moving or hot components.