LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (2.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CBFA & CCTA (Hatchback)) >> 15 Cylinder Head, VALVETRAIN >> Specifications >> Fastener Tightening Specifications >> Cylinder Head Cover Bolt Tightening Sequence and Specification

Cylinder Head Cover Bolt Tightening Sequence and Specification

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Cylinder Head Cover Tightening Sequence
GWWA15-10431Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the new cylinder head cover bolts in 3 passes in sequence -1 through 6- as follows:

scientia non olet · About LEMON Manuals