LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (2.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CBFA & CCTA (Hatchback)) >> 15 Cylinder Head, VALVETRAIN >> Removal And Installation >> Vacuum Pump >> Installing

Vacuum Pump: Installing

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications, refer to CYLINDER HEAD OVERVIEW .

-- Clean the sealing surfaces.

-- Install the seal on the vacuum pump, install the 2 bolts and then mount it to the cylinder head.

The rest of the installation is performed in the reverse order of removal.

scientia non olet · About LEMON Manuals