Windshield Wiper Arm: Installation
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Tighten the windshield wiper arm mounting nuts to the specification only after setting the windshield wiper blade park position.
-- Deactivate the alternating park position function, refer to WIPER MOTOR ALTERNATING PARK POSITION FUNCTION, DEACTIVATING .
-- Turn on the ignition and then switch the windshield on and off so that the Windshield Wiper Motor -V- goes into its park position.
-- Mount both wiper arms on the windshield wiper arm shafts and tighten the nuts -arrows- hand-tight.
-- Adjust the windshield wiper arms, refer to WINDSHIELD WIPER ARMS, ADJUSTING .
-- Install the cover and the trim.