Washer Fluid Reservoir: Installation

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

First install the windshield washer fluid reservoir:

Install in reverse order of removal.

Now install the filler tube:

Install in reverse order of removal. Note the following:

The casting mark on the bottom side of the filler tube must be inserted into the hole -arrow-.

Fig 1: Casting Mark On Under Side Of Filler Tube And Engine Mounting Hole

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Connecting tube -1- and filler tube -2- must be joined so that the guides -arrows- engage in each other.

Fig 2: Connecting Tube And Filler Tube Joined So That Guides Engage In Each Other

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.