LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (1.8L & 2.0L - Engine Mechanical, Fuel Injection & Ignition - General, Technical Data - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Convertible)) >> 00 General, Technical Data >> Diagnosis And Testing >> Vacuum System, Checking

Vacuum System, Checking

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

Procedure

-- Check all vacuum lines in the vacuum system for:

-- Check the vacuum lines leading both to and from the solenoid valve to the respective component.

-- If there is a fault, check all the vacuum lines for the named component, but also all the vacuum lines to the other components.

-- If using the Hand Vacuum Pump VAS 6213 does not produce any pressure or if the pressure drops again right away, then check the hand vacuum pump and the connection hoses for leaks.