LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (1.8L & 2.0L - Lubrication - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Hatchback)) >> 17 Lubrication >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Components Fastener Size Nm
Oil Level Thermal Sensor -G266- nut - 9
Intake line bolt1 - 4 + 45°
Chain tensioner bolt - 9
Oil return pipe bolt1 - 4 + 45°
Oil pump bolt1 - 8 + 90°
Oil baffle bolt1 - 4 + 45°
Oil drain plug - 30
Engine oil cooler bolt1 - 8 + 45°
Crankcase ventilation to turbocharger hose bolt2 - 4
Oil filter housing - 25
Oil Pressure Regulation Valve -N428- bolt1 - 4 + 90°
Oil Pressure Switch -F1- - 20
Reduced Oil Pressure Switch -F378- - 20
  • 1 : Replace after removing.
  • 2 : Self-tapping bolt. Position the bolt by hand and turn it until it finds the old threads. Then tighten the bolt to the specification.
scientia non olet · About LEMON Manuals