Oil Separator: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Oil Separator Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the Ignition Coil 3 With Power Output Stage -N291- and Ignition Coil 4 With Power Output Stage -N292-, refer to IGNITION COILS WITH POWER OUTPUT STAGES -N70-, -N127-, -N291- AND -N292- .

-- Loosen the hose clamp -1- and remove the hose from the EVAP Canister Purge Regulator Valve 1 -N80-.

-- Remove bolt -2- and then remove crankcase ventilation hose -3- from oil separator.

-- Remove the bolts -arrows- and the oil separator.