LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (1.8L & 2.0L - Lubrication - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Hatchback)) >> 17 Lubrication >> Removal And Installation >> Oil Pump >> Removing

Oil Pump: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Oil Baffle Bolt
GWWA17-10746Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the oil pan lower section, refer to OIL PAN LOWER SECTION .

-- Remove bolt -arrow- and oil baffle.

-- Pull the chain tensioner spring using the Elbow Assembly Tool T10118 in direction of -arrow- and secure it with the Chain Tensioner Locking Tool T40265.

Fig 2: Identifying Chain Tensioner Spring, Remove/Install Components
GWWA17-10747Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- and the oil pump.

Fig 3: Locating Oil Pump Bolts
GWWA17-10749Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.