LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (1.8L & 2.0L - Lubrication - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Hatchback)) >> 17 Lubrication >> Removal And Installation >> Oil Pressure Switch -F1- >> Installing

Oil Pressure Switch -F1-: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Replace O-rings after removing them.

-- Check the oil level.

NOTE:

Replace the seal.

To prevent oil loss, insert the new Oil Pressure Switch -F1- in the opening immediately.

scientia non olet · About LEMON Manuals