Oil Pressure Regulation Valve -N428-: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation, refer to Overview - Herbie Beetle Decorative Film .

-- Remove the ribbed belt, refer to RIBBED BELT .

-- Place the Used Oil Collection and Extraction Unit SMN372500 under the engine.

-- Disconnect the connector -1-.

Fig 1: Identifying Oil Pressure Regulation Valve

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -2- and the Oil Pressure Regulation Valve -N428- -3-.