LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (1.8L & 2.0L - Lubrication - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Hatchback)) >> 17 Lubrication >> Removal And Installation >> Oil Pan Upper Section >> Removing

Oil Pan Upper Section: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the oil pan lower section, refer to OIL PAN LOWER SECTION .

-- Remove the rear sealing flange, refer to SEALING FLANGE, TRANSMISSION SIDE .

-- Remove the oil pump, refer to OIL PUMP .

-- Disconnect the connector -1-.

Fig 1: Identifying Oil Pressure Regulation Valve
GWWA17-10826Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE: Ignore item -2-.

-- Remove the bolts -arrows-.

Fig 2: Identifying Bolts
GWWN17-10200Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -1 through 14- and the upper section of the oil pan.

Fig 3: Oil Pan Upper Section - Tightening Sequence
GWWA17-10823Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
CAUTION: First pry the oil pan upper section out on the transmission side. When prying out, be careful not to bend the timing chain cover.